The valve body is the main component of the valve body, and there are different mechanical manufacturing methods based on the pressure level. For example: casting, forging, etc. Medium and low pressure valve bodies are usually produced using a casting process. The valve body of medium and high pressure specifications is produced using forging technology. The definition of "valve" is a device used to control the direction, pressure, and flow rate of fluid in a fluid system. A valve is a device that enables the flow or cessation of medium (liquid, gas, powder) in pipelines and equipment, and can control its flow rate. According to different process media, the material of the valve body is different metal materials.

The valve body is the valve core part of the valve body, and commonly used materials include ceramic valve cores and copper valve cores. Mainly used for water and air valves, to block water or airflow inside the valve. Overall replacement is common, and the choice is to buy a valve that can replace the valve core separately, without removing the valve, and replace the valve core directly.

Function of valve body:

1. The valve body mainly refers to the valve core part of the valve. Commonly used materials include ceramic valve cores and copper valve cores.

2. The main function of the valve body is to have a water valve and an air valve inside the valve, which are used to block water flow or airflow.

3. Use and replacement of valve body: Overall replacement is relatively common. The choice is to buy a valve that can replace the valve core separately, without dismantling the valve, and directly replace the valve core.

The reason why there are more inlet valves than water

1. The inlet valve is stuck

Check if the float or float of the inlet valve is stuck. You can use your hands to pull the float up and down, and generally it can move smoothly up and down.

2. Foreign objects inside the valve body

Foreign objects inside the inlet valve can cause the needle valve pressure chamber at the top of the inlet valve to fail to form a water stop. In this case, please have a professional repair or purchase a replacement.

3. Floating fault

Check if the float of the inlet valve is stuck or disturbed by something. Under normal circumstances, the buoy can move freely up and down.

4. Internal damage to valve body

There is an internal problem with the inlet valve, such as sand or small debris inside the inlet valve body. In this case, only one more replacement can be purchased.